Spycor Building Products is your premiere source for cost-effective moisture management products. We have various flashing accessory products from Dörken DELTA®, one of the world's most highly regarded air and moisture barrier brands. Choose from DELTA-FAS corners, molding strips, DELTA-FAST'ner multi-stud fasteners, edge termination PVC profile, screw fasteners and caulking, all designed for the installation of DELTA waterproof membranes.

For optimal drainage in all cavity wall construction, we offer high performance products from Advanced Building Products. Since masonry absorbs water and humidity, a cavity wall prevents damage by draining water through weep holes at the base of the wall system. Weep holes can also be placed over windows to prevent wooden window frames from rot.

From moisture management specialists Dörken and Advanced Building Products, we offer top-performing waterproofing materials like Strip-N-Flash self-adhering waterproofing membrane, DELTA®-Footing Barrier and Moistseal polyvinyl chloride sheeting. Moisture, which is easily absorbed by concrete, can lead to the growth of fungus and mold, causing an unhealthy indoor environment. It can also cause structural decay. These products are designed for maximum durability in addition to protecting new construction from water and moisture.

If you need to ensure a waterproof electrical panel, easy-to-install Quickflash® flashing panels provide many benefits. In addition to stopping air leakage and helping to prevent water from intruding, they're economical, saving both time and labor costs. With Quickflash panels, you don't need to use sealant, and they're non-conductive and non-corrosive. This is the only flashing that is specifically made for wall penetrations, and they self-seal around fasteners. These flashing panels also reduce liability, and they work with all cladding systems. We offer their full line to meet your needs.

IMPORTANT: CLICK HERE for Electrical Box Cross Reference

These Quickflash® plumbing flashing panels are designed for effective weatherproofing of plumbing, gas and HVAC panels, to protect against moisture intrusion. Certain Quickflash panels can also be used for low voltage electrical panels or with electrical pipes through brick and stone veneers. You can find the right Quickflash panel for specific sizes of copper, rigid and PVC pipes, and certain models can be used with ABS pipes and with sheet metal duct for HVAC applications. Since 2001, Quickflash has been the only U.S. company to make these flashing panels, which prevent leaks and water damage that can become a major concern. All Quickflash flashing panels are proudly manufactured in the U.S.

Quickflash®, based in the U.S. since 2001, is the only American company that manufactures flashing panels for electrical, plumbing and HVAC penetrations. These HVAC flashing panels are designed for A/C line sets, various kinds of pipes (copper, PVC, PBS and rigid) and sheet metal ducts. With leaks and water damage being a major concern to builders, potential home buyers and insurance companies, effective moisture management should be an important consideration for any new building project. As with all the products we offer here at Spycor Building Products, these Quickflash flashing panels have been selected for their quality, value and effectiveness at preventing moisture and water from penetrating the building envelope.