Protecting your house from losing energy in the winter and summer isn't only about insulating your walls. A poorly insulated roof can lose a ton of energy. DELTA®-MAXX TITAN by Cosella Dorken's energy efficient shingles for roofs can help keep your home at the right temperature and energy bill low even in the most extreme of months.
DELTA®-MAXX TITAN high vapor permeability, reflective, watertight roof underlay has all of the energy saving properties you need in a roof underlayment. It'll keep things cool in the summer, and warm in the winter. Get yours here at Spycor Building Products for a competitive price.
Material
Made with layers of high-strength Polyester fabric, a vapor permeable Polyurethane coating, and a Titanium finish to reflect heat, the Titan delta series is built to last. DELTA®-MAXX TITAN is sold in 804 square foot rolls.
Characteristics
DELTA®-MAXX TITAN reflects up to 50% of radiant energy. This can cause the temperature in your attic to be lowered by up to 2 degrees as compared to roofs with conventional roofing underlays.
The smooth surface of DELTA®-MAXX TITAN'S Polyester fabric, as well as the embossed Polyurethane surface make installation fast and simple. The high tear strength of DELTA®-MAXX TITAN by Dorken has proven to enhance safety and reliability of roofs for more than 15 years.
Application
DELTA®-MAXX TITAN is lightweight, making installation simple and safe. It unrolls quickly and can easily be aligned. This tough material will resist any damage from normal handling on construction sites (such as being pulled or walked on), and has proven outstanding performance when exposed to wind.
Order your own DELTA®-MAXX TITAN roof underlayment from our trusted suppliers here at Spycor Building Products.
Evaluation Report and Building Code Approval
Technical Data
Water Vapor Transmission ASTM E96-00, Proc. B | 196.3 g / sqm / 24 h |
|---|
Permeance - ASTM E96-00, Proc. B | 1620 ng / Pa / s / sqm |
|---|
Perms - ASTM E96-00, Proc. B | 28.3 grains /h /sqft /in Hg |
|---|
| Breaking Load - ASTM D5035 | MD: 100.6 lb / 2in (447.5 N / 50mm) CD: 60.2 lb / 2in (267.7 N / 50mm) |
|---|
| Elongation at Break - ASTM D5035 | MD: 55.1% CD: 93.6% |
|---|
| Tear Resistance - ASTM D1922-03a | MD: 5640 g CD: 7604 g |
|---|
| Tearing Strength - ASTM D4533 | MD: 58.3 lb (259.3 N) CD: 42.1 lb (187.3 N) |
|---|
Water Impact Penetration Resistance AATCC 42-2000 | no water passing |
|---|
Hydrostatic Water Resistance CAN/CGSB-4.2 No 26.3-95/ISO | 776 cm |
|---|
Fastener Pull-Through Force ASTM D3462 | 232 N |
|---|
Flame Spread - ASTM E84-09 | 0 NFPA Class A; UBC Class I |
|---|
Smoke developed - ASTM E84-09 | 40 NFPA Class A; UBC Class I |
|---|
Roll weight | approx. 29 lb (13 kg) |
|---|
Roll width | 4.92 ft (1.5 m) |
|---|
Roll length | 164 ft (50 m) |
|---|
Temperature range | -40 °F to +176 °F (-40 °C to +80 °C) |
|---|
