Home > Moisture Management >

DELTAŽ-MS Foundation Waterproofing System

DELTA®-MS dimple board, foundation waterproofing system.


 
Only $ .53 PSF -Delivered!
Delta-MS is an Affordable, Stand Alone Waterproofing System thats Code Approved and GREEN!
Skid Pricing Available: Please call 877.293.0784
DELTAŽ-MS is made of a special high-density polyethylene (HDPE) resin. The membrane is remarkably impermeable to water and water vapor and unaffected by acidic or alkaline environments. Equipped with highly efficient additive packages, the HDPE is stabilized against oxidation and provides outstanding compressive strength, impact resistance, chemical and environmental stress crack resistance (ESCR).

***Remember to buy (1) Accessory Pack per roll of Delta-MS***

5' Rolls:
  • FREE SHIPPING in Continental US!
  • Please allow 1-5 Business Days for Delivery.
6.6', 7', & 8' Rolls:
  • Mix & Match (3) rolls for FREE SHIPPING in Continental US!
  • Please allow 7-10 Business Days for Delivery.
9.8' Rolls:
  • Minimum Order (11) Rolls
  • FREE SHIPPING in Continental US!
  • Please allow 7-10 Business Days for Delivery.


Item# Item Name Delivered Price Qty Add
DLMS-5.0 DELTAŽ- MS 5.0 ft x 65.6 ft (328 SqFt/Roll) $ .53 psf
$175.22
DLMS-6.6 DELTAŽ- MS 6' 6" ft x 65.6 ft (433 SqFt/Roll) $ .53 psf
$229.70
DLMS-7.0 DELTAŽ- MS 7.0 ft x 65.6 ft (459.2 SqFt/Roll) $ .53 psf
$245.20
DLMS-8.0 DELTAŽ- MS 8.0 ft x 65.6 ft (524.8 SqFt/Roll) $ .53 psf
$281.52
DLMS 9.8 DELTAŽ- MS 9' 10" ft x 65.6 ft (645 SqFt/Roll) $ .53 psf (11 Roll Minimum)
$359.12
DLMS-ACC DELTAŽ- MS Accessory Pack -for 5' Rolls (includes 75 Delta FAST-ners, 200 Nails, 75' Delta Flash, 2 Tubes Caulk) Buy 1 per Roll!
$69.73
DLMS ACC-6 DELTAŽ- MS Accessory Pack -for 6.6'-9.8' Rolls (includes 75 Delta FAST-ners, 200 Nails, 75' Delta Flash, 2 Tubes Caulk) Buy 1 per Roll!
$69.73
Check the items you wish to purchase, then click


Features:

DELTAŽ-MS is the only dimpled membrane in the market that is being manufactured in a co-extrusion process, utilizing virgin polyethylene on the outside layers and post-industrial recycled HDPE in the middle. Thus the product is significantly more resilient to environmental influences like oxygen, acidic soils or alkaline environments (concrete wall), etc. Tests performed by independent and accredited laboratories prove the unrivaled long-term performance.

The membrane is vacuum formed in a dimpled pattern to create an air-gap at the foundation wall. This unique design allows any water getting past the dimpled membrane to fall freely to the footer drain.

DELTAŽ-MS is available in many sizes to cover any foundation with a minimum of overlaps and seams.

Product Application

The air-gap, which is created by the impermeable dimpled sheet, guarantees a safe separation between the foundation wall and any ground-moisture. Thus the membrane keeps water from ever touching the wall on its way through the soil to the footing drainage system. If water were to cross the sheet anywhere, the air-gap would allow it to drain without building up any hydrostatic pressure. The air-gap also allows the foundation wall to "breathe". During back-fill operations the tough membrane serves as a protection layer. If DELTAŽ-MS is used on top of sheet or spray applied waterproofing systems it provides highly effective protection from damages caused by back-filling operations.

Unlike any coating, DELTAŽ-MS bridges large cracks, ignores damage points and deflects water as well as soil dampness. In addition it condenses and drains away construction moisture, directing it to the footing drain.

DELTAŽ-MS is up to one half of the price of conventional waterproofing systems while offering a complete protection system for foundation walls.

This product can also be utilized as protection layer over spray or sheet applied waterproofing systems.





Technical Specs:

Product name

DELTAŽ-MS

Color

chocolate brown with orange stripe

Material

high-density polyethylene (HDPE)

Dimple height

apprx. 5/16" (8 mm)

Compressive strength

apprx. 5,200 psf (250 kN/m˛)

Roll dimensions

3.5' x 65.6' (1.07 x 20 m)
5.0' x 65.6' (1.52 x 20 m)
6.0' x 65.6' (1.83 x 20 m)
6.6' x 65.6' (2.00 x 20 m)
7.0' x 65.6' (2.13 x 20 m)
8.0' x 65.6' (2.45 x 20 m)
9.8' x 65.6' (3.00 x 20 m)

Air-gap volume between dimples

apprx. 0.13 gal/ft˛ (5.3 l/m˛)

Temperature range

-22°F to +176°F (-30°C to +80°C)

Chemical properties

excellent chemical resistance, no root-penetration, rot-proof, approved for drinking water applications

Toxicity

non-toxic, non-polluting

Flammability

B2 according DIN 4102 B1 available upon request

Service life expectancy

> 25 years (at pH between 4 and 0, and temperature < 25°C). The membrane should not be exposed to UV light for more than 30 days

Codes: Wall Waterproofing (USA) -ICC-ES, ESR 2303
Drainage Layer -CCMC # 12788-R
Damproofing - CCMC # 12658-R




FAQ's:
How does DELTAŽ-MS work?
DELTAŽ-MS is a dimpled Polyethylene membrane that utilizes an "air-gap" between the foundation wall and the membrane, which acts as a capillary break to stop water from reaching the foundation wall. The air-gap provides drainage for any transient moisture that gets behind the membrane and directs it to the perimeter foundation drain for evacuation. The DELTAŽ-MS is approved for use as a stand alone foundation protection system, generally not requiring the use of surface preparations (i.e. tar or asphalt) prior to the membrane installation.

Where can I purchase the DELTAŽ-MS?
You can purchase DELTAŽ-MS at Box Stores like RONA, Home Hardware and many Building Supply outlets. If you are looking to have the product professionally installed for you, visit the 'Contact us' section of our website to locate a local Certified Installer.

What Building Code Approvals does DELTAŽ-MS have?
DELTAŽ-MS is approved for use as a dampproofing and drainage layer material as per the National Building Code of Canada, Ontario Building Code, and all Provincial and Territorial Codes adopting the National Building Code of Canada. It is also approved for use as a dampproofing and wall waterproofing material as per the International Residential Code and the International Building Code in the United States. It is also approved for use by some state specific Building Codes. Please contact our Technical Service Department at 1-888-433-5824 for further details.

Should I install DELTAŽ-MS to the top of the footing or to the edge of the footing?
DELTAŽ-MS can be installed with either method, however installing the membrane continuously out to the edge of the footing is considered “best practice” and provides additional benefits to control water seepage between joints of the foundation wall. We recommend installing DELTAŽ-MS to the edge of the footing.

How many fasteners are required to install a roll of the DELTAŽ-MS?
Based on the spacing requirements of the fasteners and the overall installation as shown in the installation instructions, you will require 75 fasteners/clips when considering the DELTAŽ-FAST'ner. The total requirement for the mechanical fasteners (i.e. nails) is 100 pieces. For more information on the installation you can review the installation instructions on the wrapper of the product or on the web site.

Do you need to spray waterproofing or dampproofing on the foundation wall before installing DELTAŽ-MS?
No, because the DELTAŽ-MS membrane is approved for use as a “stand alone” dampproofing/drainage layer (in Canada) and as a wall waterproofing material (in the U.S.). Under special conditions, the use of a spray applied system in conjunction with DELTAŽ-MS may be specified by the designer of the foundation. There is no compatibility issue between the DELTAŽ-MS and common spray applied systems. For further information you can contact our Technical Service Department at 1-888-433-5824.

Can the DELTAŽ-MS be installed on concrete block foundation walls?
Yes, in addition to being a building code requirement for below grade uses of concrete block, it is highly recommended to parge concrete block foundations prior to installing DELTAŽ-MS.


Related Products
DELTAŽ-MOLD STRIP is a 3" wide by 6'-6" long molding (33 strips to bundle) DELTAŽ-FAST'ner 500 Box DELTAŽ-Delta Fasteners 50 Count DELTAŽ- MS HDPE Flashing 6' strip x 2" width (33 strips to bundle)
Our Price: $99.95

Add
Our Price: $118.43

Add
Our Price: $17.80

Add
Our Price: $56.50

Add
The DELTA®-MOLD STRIP is a 3" wide by 6'-6" long molding used to finish off the installation of the DELTA® membranes around windows, doors, or gradient changes in the foundation. It is attached with concrete nails. 

 
Characteristics
DELTA®-MOLD STRI The DELTA®-FAST'ner is a multistud fastener for attaching the DELTA®-MS and DELTA®-DRAIN to the foundation wall. The fastener is used with a DELTA®-NAIL or concrete nail to fasten the DELTA® Membrane in place. The DELTA®-FAST'ner is made of HDPE and is or The DELTA®-FAST'ner is a multistud fastener for attaching the DELTA®-MS and DELTA®-DRAIN to the foundation wall. The fastener is used with a DELTA®-NAIL or concrete nail to fasten the DELTA® Membrane in place. The DELTA®-FAST'ner is made of HDPE and is or
Marflex Contractor Crack Injection Start-Up Kit DELTAŽ- MS CASE Caulk 29 fl./oz. per cartridge/ 12 cartridge tubes Moistseal - Waterproofing Membrane
Our Price: $569.00

Add
Our Price: $78.95

Add

Add
Contractor Crack Injection Start-Up Kit Start-up kit The DELTA®-SEALANT is a black mastic formulation that is used to seal off the flat tab and overlaps between membranes during the installation process. The sealant is also used to seal off any gaps in the membrane created at interior and exterior corner in Moistseal - Waterproofing Membrane

Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Excellent Product October 16, 2017
Reviewer: Brian Phillips from Kansas City , MO United States  
Im live in an area with a high water table. The soil is compacted clay where drainage runs lateral and cannot perc down. I researched many waterproofing solutions at Home Depot and Lowes but found Deltas to be the best in terms of reliability and commerical success. On the install I went ahead and bent it at the footer to allow the moisture to drain down to a perf pipe below. Also David at Spycor was super helpful on some questions I had!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Foundation Wrap October 1, 2017
Reviewer: Mary Velez  
Called company and a real person. answered the phone! Explained our needs, they knew what we needed and we placed our order. We were concerned our delivery might be delayed due to multiple hurricanes, received an email within minutes of leaving a message. Our delivery was NOT delayed at all..pretty impressive! Good price, good product, GREAT CUSTOMER SERVICE. We will  and already have recommended this company. THANK YOU

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great System August 7, 2017
Reviewer: Wayne T from Traverse City, MI United States  
Used this product for the first time.  Easy installation. Fast Shipping!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Delta-MS July 7, 2015
Reviewer: Charles Newby from Evergreen, CO United States  
I have not installed the project yet but I am confident that it will perform as required.

Thank you for the way you quickly shipped my order!

-Chuck

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Delta Waterproofing November 7, 2014
Reviewer: Tim Vandagriff from Ardmore, OK United States  
Order was shipped in a timely manner...a little damage in the packaging.....for the installation kit...but otherwise the experience was great...

Was this review helpful to you?


Browse for more products in the same category as this item:

Moisture Management
Moisture Management > Civil Engineering
Masonry
Moisture Management > Below Grade Moisture Barriers