You are here:Home > Rainscreen

DELTA®-DRY Lath Rainscreen Skid - Image 1 of 0

DELTA®-DRY Lath Rainscreen Skid - Image 2 of 0

DELTA®-DRY Lath Rainscreen Skid - Image 3 of 0

DELTA®-DRY Lathe - 12 Roll SKID 1,812 square feet

0 Reviews

$3,587.76

Skid Pricing Available:

Product Code: 22600117-SKID

Usually Ships in 2 to 3 Business Days

Qty:

Description

12 Roll Skid (1,812 square feet)

Product Details:

Ventilated rainscreen with pre-installed glass lath for manufactured stone and conventional stucco claddings
Rainscreen membrane with Air-gap Technology made of a special High-Density Polyethylene (HDPE)
Alkali-resistant glass lath that replaces wire lath for application of scratch coat• Two-sided drainage and ventilation through a unique dimple and groove design

Benefits:

DELTA®-DRY & LATH is easy, safe, and quick to install
The 2-in-1 solution reduces labor costs when used with claddings requiring scratch coat
DELTA®-DRY & LATH has a pre-installed glass lath, which makes it ideal for installing absorptive claddings
Drainage and ventilation through the air gap on the interior and exterior side of the membrane
Long-term structural integrity due to a reduced potential for water
The pre-installed, alkali-resistant glass lath is in compliance with ICC-ES AC 275 (MVMA requirements)
Meets ASTM E2925-17 (Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function)

Technical Specs

Product name	DELTA®-DRY & LATH
Color	Gray
Material	High-density polyethylene, stabilized (oxidation & UV), with alkali-resistant woven glass lath
Dimple height	approx. 2/5” (10.5 mm)	ASTM D1777-96
Compressive strength	93 kPa (1,946 psf ) @ 8 % strain	ASTM D6364-06
Drainage efficiency	approx. 95%	ASTM E2273-03
Fungus resistance	Does not support fungal growth	ASTM C1338
Fire resistance	B2	DIN 4102
Flame spread	210	CAN/ULC-S102.2
Smoke developed	105-190	CAN/ULC-S102.2
Water penetration resistance	813 kPa (118 psi) Watertight	AATCC 127
Water vapor trans- mission	22 ng/(Pa s m2)	ASTM E96, Method A
Vapor Permeance	0.14 perms [grains/h/ft2/in Hg]	ASTM E96, Method A
Contact surface of rainscreen to WRB	less than 20% greater than 80% open
Chemical properties	excellent chemical resistance, rot-proof
Toxicity	non-toxic, non-polluting
Transverse load	Exceeds code-prescribed wire lath system requirements	ICC-ES AC 11 System Combination
Attachment	≥ 48 lbs	ICC-ES AC 275 System Combination
Fastener attachment	≥ 85 lbs	ICC-ES AC 275 System Combination
Embedment	≥ 0.12”	ICC-ES AC 275 System Combination
Tensile strength (glass lath only)	Minimum 120 lbs	ICC-ES AC 275
Temperature range	-30°C to +80°C (-22°F to +176°F)
Roll weight	approx. 11.8 kg (26 lbs)
Roll length	14 m (46 ft)
Roll width	1.0 m (3’-3”)
Service life expectancy	> 25 years (at pH between 4 and 9). Do not expose to UV light for more than 30 days.

MATERIAL
DELTA®-DRY & LATH is a 3-dimensional rainscreen membrane made out of a special high-density polyethylene. It provides two-sided drainage and ventilation through its unique dimple and groove design. DELTA®-DRY & LATH has a pre-installed glass lath which makes it ideal for absorptive claddings. The alkali-resisitant (AR) glass lath replaces the wire lath for the application of the scratch coat.

PROPERTIES
The structured membrane provides drainage and ventilation, as well as a complete capillary break behind the cladding. It protects the building enclosure from bulk water intrusion (i.e. wind-driven rain), and manages incidental water leakage through the cladding. As well, DELTA®-DRY & LATH captures and drains transient moisture migrating through the wall structure. DELTA®-DRY & LATH provides an air-gap on the interior and exterior side of the membrane for drainage and ventilation. It allows water vapor, driven from the interior to the exterior of the structure, to escape through the ventilated air space between the sheathing and the membrane. At the same time, DELTA®-DRY & LATH minimizes the potential for condensation that could cause damage within the building enclosure. The membrane provides drying potential through ventilation behind any approved exterior cladding. DELTA®- DRY & LATH impedes solar-driven moisture towards the interior of the structure as occurs with absorptive cladding materials like adhered manufactured stone veneer and conventional stucco. DELTA®-DRY & LATH reduces labor costs when used with claddings requiring a scrach coat. The 3-dimentional membrane and the glass lath are placed in a single installation procedure. The pre-installed AR glass lath is in compliance with ICC-ES AC 275.

APPLICATION
DELTA®-DRY & LATH is installed outboard of the water- resistive barrier over sheathing. The material cuts easily with a utility knife. Glass lath is overlapped at seams. Manufactured stone and conventional stucco are installed as per manufacturer’s instructions.

DELTA®-DRY Lathe - 12 Roll SKID 1,812 square feet

Description

Technical Specs

Accessories

DELTA®-FLEXX BAND (ROLL) 3.94" x 32.8'

DELTA®-FLEXX BAND (ROLL) 3.94" x 32.8'

DELTA®-BUG SCREEN (20 -5' strips)

DELTA®-FLEXX BAND (ROLL) 3.94" x 32.8'

DELTA®-BUG SCREEN (20 -5' strips)

Reviews