DELTA®-DRY STUCCO & STONE Rainscreen 3.3' X 46' Roll (151 sqft) 10.5 mm

The structured membrane provides drainage and ventilation, as well as a complete capillary break behind the cladding. It protects the building envelope from bulk water intrusion (i.e. wind driven rain), and manages water leakage through the cladding. As well, DELTA®-DRY STUCCO & STONE captures and drains transient moisture migrating through the wall structure. DELTA®-DRY Stucco & Stone provides an air-gap on the interior and exterior side of the membrane for drainage and ventilation. DELTA®-DRY STUCCO & STONE is a 3-dimensional rainscreen membrane made out of a special high-density polyethylene. It provides two-sided drainage and ventilation through its unique dimple and groove design. DELTA®-DELTA®-DRY STUCCO & STONE is installed outboard of the water-resistive barrier over sheathing board. It also provides excellent performance if installed in lieu of a conventional WRB, where building authorities allow this type of application. The material cuts easily with a utility knife. Seams are simply butted together with no overlapping necessary. Wire lath is installed directly over the mortar screenExterior cladding material can be installed as usual right on top of DELTA®-DRY STUCCO & STONE . For further details please check the installation instructions.