Home > Moisture Management >

DELTA®-DRAIN 6200

DELTA®-DRAIN 6200 has been specifically designed for use over waterproofing membranes, where added protection is needed. The high-strength polymeric film adhered to the back side of the drainage core prevents potential die cutting into the waterproofing


 
Alternative Views:


Only $ 1.12 PSF -Delivered!
Delta-Drain is an Affordable, Stand Alone Waterproofing System thats Code Approved and GREEN!
Application:
  • Underground Wall Construction
  • Parking Decls
  • Foundation Walls
  • Hydrostatic Pressure Relief
DELTA®-DRAIN 6200 has been specifically designed for use over waterproofing membranes, where added protection is needed. The high-strength polymeric film adhered to the back side of the drainage core prevents potential die cutting into the waterproofing membrane. The flat side of 6200 is installed directly against waterproofed below grade wall surfaces. DELTA®-DRAIN 6200 also provides an effective protection course over waterproofing membranes.
Outstanding compressive strength and high water flow rate characterize this commercial grade drainboard. Its high-strength core provides a continuous path for water discharge, eliminating the potential for build-up of hydrostatic pressure against sub-surface structures. The non-woven geotextile allows water to pass freely into the drainage core. At the same time, it prevents the passage of soil particles to ensure that the drainage core doesn't get clogged.
Material:
DELTA®-DRAIN 6200 is a high-performance 3-layer drainage composite. It consists of a dimpled drainage core and a high-strength needle punched PP geotextile (non-woven) with excellent filter characteristics. A polymeric protection sheet adhered to the backside of the drainage core provides reliable protection against die cutting of waterproofing membranes. The Polypropylene drainboard has unmatched impact and tear resistance, and is unaffected by environmental stress cracking. The non-clogging geotextile is fully bonded to the dimpled drainage core which prevents it from being pushed into the flow channels by the load from adjacent back-fill material.
Application:
Due to its extremely high compressive strength (> 15,000 psf) DELTA®-DRAIN 6200 can be used at installation depths of 45 ft and more. It is a highly effective drainage system that provides a relief layer for hydrostatic pressure on any subsurface structure. DELTA®-DRAIN 6200 comes in two roll sizes (4'x50' or 6'x50'), making installation of the product fast and easy. Its flat side is installed against the waterproofing membrane on wall surfaces.


Item# Item Name Delivered Price Qty Add
DLDR6200-6 DELTA®-DRAIN 6200 6' X 50' (300 sqft)
$337.63
Check the items you wish to purchase, then click


Technical Specs:
Product name DELTA®-DRAIN 6200
Color black
Material

Drainage-core: virgin Polypropylene

Geotextile: Polypropylene

Protective backsheet: LDPE

Dimple height 0.39" (10 mm) ASTM D1777-96
Compressive strength 15,100 psf (723 kN/m²) ASTM D6364-06
Geotextile grab tensile strength 100 lbs (445 N) ASTM D4632-91
Geotextile elongation 60% ASTM D4632-91
Geotextile trapezoidal tear 45 lbs (200N) ASTM D4533-91
Geotextile puncture strength 65 lbs (289 N) ASTM 4833-88
Geotextile mullen burst 210 psi (1446 kPa) ASTM D3786
Geotextile apparent opening size (AOS) 70 sieve size (0.212 mm) ASTM D4751-99
Geotextile water flow rate 140 gal/min/ft² (5703 l/min/m²) ASTM D4491-99
Geotextile weight (typical) 4.0 oz/yd² (135 g/m²) ASTM D5261-92
Geotextile UV resistance 70% @ 500 h ASTM D4355-92
Geocomposite water flow rate (v) 18 gal/min/ft (223 l/min/m) ASTM D4716-99
Geocomposite water flow rate (h) 3.2 gal/min/ft (40 l/min/m) ASTM D4716-99
Toxicity non-toxic, non-polluting
Roll size 4' x 50' (1.20 x 15.25 m)
6' x 50' (1.83 x 15.25 m)
Roll weight 43 lbs (19.5 kg)
64 lbs (29 kg)
Service life expectancy

> 25 years (at pH between 4 and 9 and temperature below 25°C). Do not expose to UV light for longer than 30 days.




Related Products
DELTA®-GRIP FASTENER - Box 100 DELTA®-DRAIN PROFILE - Bundle of 20 DELTA®-FAST'ner 500 Box DELTA®-SCREW FASTENER -Box of 50
Our Price: $250.41

Add
Our Price: $330.91

Add
Our Price: $161.00

Add
Our Price: $59.93

Add
The DELTA®-FAST'ner is a multistud fastener for attaching the DELTA®-MS and DELTA®-DRAIN to the foundation wall. The fastener is used with a DELTA®-NAIL or concrete nail to fasten the DELTA® Membrane in place. The DELTA®-FAST'ner is made of HDPE and is or DELTA®-DRAIN PROFILE The DELTA®-FAST'ner is a multistud fastener for attaching the DELTA®-MS and DELTA®-DRAIN to the foundation wall. The fastener is used with a DELTA®-NAIL or concrete nail to fasten the DELTA® Membrane in place. The DELTA®-FAST'ner is made of HDPE and is or DELTA®-SCREW FASTENER

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Moisture Management
Moisture Management > Civil Engineering
Masonry
Moisture Management > Below Grade Moisture Barriers