Cosella Dorken DELTA FL  SKID
Cosella Dorken DELTA FL  SKID - Image 1 of 0
Cosella Dorken DELTA FL  SKID - Image 2 of 0
Cosella Dorken DELTA FL  SKID - Image 3 of 0
Cosella Dorken DELTA FL  SKID - Image 1 of 0
Cosella Dorken DELTA FL  SKID - Image 2 of 0
Cosella Dorken DELTA FL  SKID - Image 3 of 0
Cosella Dorken DELTA FL  SKID - Image 1 of 0
Cosella Dorken DELTA FL  SKID - Image 2 of 0
Cosella Dorken DELTA FL  SKID - Image 3 of 0

DELTA®-FL Subfloor SKID 4' 9" x 68' 6" (11-Rolls/3608 sqft)

Dörken Systems Inc.
0 Reviews
$0.00
Product Code: DLFL-SKID
Usually Ships in 24 Hours
DELTA®-FL is a uniquely dimpled, heavy-duty grey plastic membrane that keeps you and your family warm and comfortable in your basement, or any room in the house with a concrete, slab-on-grade floor. The membrane is installed with its dimples down to create a 5/16-inch thick air space above the slab, and can be covered with a plywood subfloor and topped off with carpet or flooring systems.

DELTA®-FL on concrete floors protects sensitive materials by exploiting the concept of vapor pressure - that is, water vapor seeks to equalize its pressure by moving from areas of high pressure to areas of low pressure.

In a conventional basement, dry air in the living space acts as a magnet for water vapor seeping up through the concrete. But with the DELTA®-FL system, the space between the dimples provides a sufficient air-gap to equalize the water pressure above and below the concrete slab.

Though the air in the living space is completely isolated from the system, DELTA®-FL is designed to allow small amounts of water vapor into the room to maintain a healthy humidity level.

The membrane also provides a thermal break that generates instant comfort and warmth for your basement. DELTA®-FL is an inert material. The air-gap membrane has an outstanding compressive strength of > 250 kN/m², is extremely tough and rugged and can withstand heavy loads which allows for any finishing on top of the membrane.

The reduction in head room is minimal and the product is extremely easy and fast to install. DELTA®-FL comes with a 20 year product warranty.

DELTA®-FL functions in conjunction with wood laminate floors and is a simple new solution to create a beautiful, high-performance basement floor, easy enough for the average homeowner to install.

Once DELTA®-FL and plywood sheets are laid out, a variety of floor coverings can be installed:

- carpeting with rubber underlay
- linoleum (on top of multiply board)
- tiles
- peel & stick
- hardwood flooring
- laminate floors (floating directly on top of DELTA-FL)

Product name

DELTA®-FL

Color

grey

Material

High Density Polyethylene (HDPE)

Dimple height

apprx. 5/16" (8 mm)

Compressive strength

apprx. 5,200 psf (250 kN/m²)

Air-gap volume between dimples

apprx. 7,9 l/m²

Temperature range

-22°F to +176°F (-30°C to +80°C)

Roll size

5' x 65.6' (1.52 m x 20.0 m)

Sheet size

4' x 8' (1.22 m x 2.45 m)

Toxicity

non-toxic, non-polluting

Water permeability (EN ISO 11058)

8 · 10-² m/s

Service life expectancy

Ø25 years (at pH between 4 and 0 and temperature < 25°C).

ØThe membrane should not be exposed to UV light for more than 30 days.

Reviews

Average Customer Review:
( 0 )